Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.

Don't ignore the forklift at the workplace. If the procedure is not good, there will be serious accidents in minutes, and there are numerous mishaps including forklifts.

Instance 1: The forklift freight obstructed the vehicle driver's sight, and the person in front could not be found, resulting in a rolling accident.
Instance 2: In order to keep the equilibrium of the forklift when raising hefty products, the workers used their body weight as the counterweight, which almost caused casualties.
Instance 3: The size of the forklift freight surpasses the allowable width of the course and holds on the roadside rack, which practically causes an accident.
Instance 4: Forklift is speeding up and rolls over during a turn.
Instance 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the seat belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a safety belt and dropped from the automobile when it rolled over and was squashed.
Forklift operation should pay attention to these issues ：.

Begin.
1. Prior to starting, observe the surroundings, and after validating that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge have to be risk-free prior to starting.
3. When the forklift begins with a load, the vehicle driver ought to initially verify that the lots is stable and reliable.
4. The begin must be sluggish and constant.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not lift the fork expensive when driving. When entering and leaving the task website or while driving, be careful that there will be no barriers in the sky. When the tons is taking a trip, the fork must not be increased expensive, which will affect the security of the forklift. .
3. After dumping, the fork should be reduced to the regular driving position before driving. .
4. When turning, if there are pedestrians or lorries close by, the driving signal should be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will trigger the automobile to shed side stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to obey the traffic rules in the factory and should keep a specific security distance from the automobile ahead. .
7. When the forklift is running, the tons should be in the lowest setting that does not hinder the driving, and the gantry needs to be properly slanted back. The lots shall not be raised except when stacking or packing. .
8. The elevation of the tons must not obstruct the chauffeur's view. In special situations, when the product affects the forward vision, drive at a reduced rate when reversing.
9. It is forbidden to turn on the ramp, neither to drive throughout the ramp. .
10. The safe driving speed of the forklift in the factory location is 5 km/h, and it should drive securely at a low rate when getting in the production workshop location. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to stand on the fork to hold items and play a balancing role. .
12. If issues are found, they will certainly be fixed and reported in a prompt fashion, and they will never run with illnesses or conceal them.

filling and dumping.
1. When fork-loading items, the range in between both forks need to be readjusted as needed to make the tons of the two forks well balanced and not skewed, and one side of the thing must protest the rack. .
2. It is prohibited to deal with a solitary fork or make use of a fork top or draw. In unique situations, safety warning signs need to be established to advise surrounding pedestrians. .
3. In the process of packing and unloading products, the forklift should be stopped with the brake. .
4. The rate of the vehicle must be slow-moving and stable. Beware not to roll the wheels on the dunnage, so as not to extend the rolled objects and hurt individuals. .
5. When using a fork to fork the goods, the fork should be as deep as feasible under the load, and it must be kept in mind that the fork suggestion should not touch various other items or items. The load should be maintained with very little back tilt of the gantry to make sure that the load does not move backwards. The pole can be tilted ahead a little when the tons is decreased to permit easy positioning of the lots and removal of the forks. .
6. It is prohibited to fork items at high speed and collide with difficult things with the fork head. .
7. When the forklift is functioning, it is forbidden for individuals to stand around the fork, so regarding stay clear of the collapse of the goods and injure people. .
8. Overloading is forbidden, and it is banned to use forks to raise employees to take part in high-altitude operations to stay clear of high-altitude dropping accidents. .
9. It is not allowed to utilize the brake inertia to slide, place, round or roll things. .
10. It is not permitted to make use of forks to select, transform pallet dump.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Prior to leaving the forklift, you need to unload the goods or reduced the fork framework.
2. Pull the emergency brake take care of to dead or dispirit the parking brake button.
3. The engine is turned off and the power is cut off. (Except for unique situations, such as the chauffeur does not leave the vehicle's view and does not surpass 1 min).
4. Remove the key. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the look ought to be examined, and fuel, lubricating oil and cooling water ought to be added.
2. Examine the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and effective.
4. Throughout the operation of the forklift, inspect whether the pressure and temperature level are regular.
5. After the forklift is running, the external leak must likewise be checked and the seals should be changed in time.

Forklift Safety Operation Specifications.
1. You need to examine before leaving the vehicle;.
2. When you encounter a person before you during driving, you must send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not surpass 5 km/h;.
4. When driving, the low point of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning ought to not be too sharp to stop the tendency of "free switching";.
6. Running up and down the incline ought to be sluggish and consistent, and no switching on the slope is permitted.
7. Do not drive across the gradient. When the gradient is greater than 10%, the automobile must be Stand-on Electric Pallet Stacker driven backwards when declining;.
8. When the forklift workers bring the goods and move forward, if they come across big or hefty items and go to the chauffeur's line of sight, they should take the turning around exercise
.
The "Eight Prohibitions" should be followed in the operation.
1. Solitary fork procedure is not allowed.
2. It is not permitted to raise the goods for long distance driving.
3. It is not allowed to pick up the goods by handing over the pallet with Electric Forklift Truck for Warehouse the fork.
4. It is not enabled to straight shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not permitted to utilize inertia force to pick up the goods.
6. It is not permitted to make use of braking pressure to exile round or easy-to-roll objects.
7. It is not enabled to bring individuals to work with the pallet or fork, and it is purely restricted to stand under the fork after the fork is increased.
8. Do not drive laterally on inclines
.
Auto parking is not permitted under the list below conditions.
1. Contours, slim roads, railway crossings;.
2. Areas with a longitudinal incline higher than 5%.
3. When there is an barrier on one side of the road, the contrary side of the area with the same size as the barrier ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844